10mm Glue-In Channel Cuff Bracelet / plated brass with a bright rhodium finish

10mm Glue-In Channel Cuff Bracelet is a pre-formed blank cuff with a hollow recessed channel to allow you to glue in a leather strap. The channel is designed to allow for a 10mm leather strap or similar material. This cuff is plated brass and is free of lead, nickel, cadmium and hypoallergenic. There is a drill hole at the back of one end to allow for a jump ring so you can attach a charm.

This bracelet is fairly stiff at approx 15 gauge. We found the easiest way to put it on is to roll it over from the outside of your wrist - rather than trying to push in straight on. Once you've done it a few times, you will find it goes on easily.

This bracelet can fit comfortably up to a 7 inch wrist. This bracelet can be opened a bit for larger wrists by carefully pulling the ends apart.

Item Specs:

• Plated Brass
• Cast in China / Plated in EU
• Lead Free, Nickel Free, Cadmium Free
• Bracelet Width (Side to Side ID): 63mm
• Channel Width (ID): 11.2mm
• Channel Length (ID): 160mm
• Channel Depth: 2mm
• Gauge: Approx 15 AWG
• Weight: 17.5 grams